华为路由器ppp协议-chap认证配置.docx

《华为路由器ppp协议-chap认证配置.docx》由会员分享，可在线阅读，更多相关《华为路由器ppp协议-chap认证配置.docx（2页珍藏版）》请在优知文库上搜索。

1、华为路由器PPP协议chap认证配置实验拓扑图,PPP链路使用Ch叩认证*认*方提供好也电认证方命令：HuaweiaaaHuawei-aaalocal-userzhangsanpasswordcipher123Huawei-aaalocal-userzhangsanservice-typeppp/先创建用户并把用户类型设置为PPPHuaweiints40Huawei-Serial400link-protocolppp更改链路类型为PPPHuawei-Serial400pppauthentication-modechap加密方式改为ChaP认证Huawei-Serial400pppchapuse

2、rzhangsan设置认证名-为刚刚创建用户的用户名Huawei-Serial400ipaddressppp-negotiate开启ip协商功能被认证方命令Huaweiints40Huawei-Serial400link-protocolpppHuawei-Serial400remoteaddress12.1.1.1给对端分配工P地址为12.1.1.1Huawei-Serial400pppchapuserzhangsan认证名确认-为认证方创建的账号名Huawei-Serial400pppchappasswordcipher123认证密码确认密文密码（CiPher）-为认证方创建账号的密码Hu

3、awei-Serial400ipaddress12.1.1.224给S4/0/0口分配ip地址Huawel-Seral400ping12.1.1.1data bytes, press CTRL C to breakReplyReplyReplyReplyReplyfromfromfromfromfrom11111:bytes三561:bytes-561:bytes561:bytes561:bytes三56Sequence-1Sequence”Sequence三3SequencerSeqUenCeYttl-255ttl-255ttl-255ttl-255ttl-255time-50time-20tme三40tlme20time-30smsxsmsHIS12.1.1.1pingstatistics5packet(s)transmitted5PaCXeC(三)received0.00%packetlossround-tripmnavgmax-20/32/50ms