华为交换机ripv1配置.docx

《华为交换机ripv1配置.docx》由会员分享，可在线阅读，更多相关《华为交换机ripv1配置.docx（2页珍藏版）》请在优知文库上搜索。

1、华为交换机Ripvl协议的配置rip（路由信息协议）192.168.2.2GECWOarA 192.168.3.11、按照上图给路由器个端口及PC机配置ip地址Arl:system-viewHuaweiundoinfo-centerenable禁止显示信息提示Huaweiintg00lHuawei-GigabitEthernetOOlipadd192.168.1.124Huawei-GigabitEthernetOOlquitHuaweiintg000Huawei-GigabitEthernetOOOipadd192.168.2.124Huawei-GigabitEthernetOOOquit

2、HuaweidisiprouHuaweidisiprouting-table查看路由表，只有直连路由，没有3.0段的路由Ar2:syHuaweiundoinfo-centerenableHuaweiintg000Huawei-GigabitEthernetOOOipadd192.168.2.224Huawei-GigabitEthernetOOOquitHuaweiintgO/O/1Huawei-GigabitEthernetOOlipadd192.168.3.124Huawei-GigabitEthernetOOlquitHuaweiHuaweidisiprouting-table查看路由表

3、，只有直连路由，没有1.0段的路由2、配置rip路由协议Arl:Huaweirip1启用rip协议，进程号为1Huawei-rip-lnetwork192.168.1.0向直连网段1.0进行宣告Huawei-rip-lnetwork192.168.2.0向直连网段2.0进行宣告Huaweidisiprouting-table查看路由表Ar2：Huaweirip1Huawei-rip-lnetwork192.168.2.0Huawei-rip-1network192.168.3.0Huawei-rip-lquitHuaweidisiprouting-table查看路由表，已经生成了Lo段的rip

4、路由或者Huaweidisiprouting-tableprotocolrip只看生成的rip路由3、用PC验证WPel一二DIx_SW no-ri 组第UDP发包工具串口40.00%packetlossround-tripminavg/max=0/21/31msPOpinq192.168.3.2Ping192.168.3From192168.3From192.168.3From192.168.3From192.168.3From192.168.3192.16.3.2pingstatistics5packet(s)transmitted5packet(s)received0.00%packetlossround-tripzxnavgmax=15/15/16msPO